Friday, December 30, 2011

10 Pack Promark Full Extension Drawer Slide 22" 100lb Load Rating

10 Pack Promark Full Extension Drawer Slide 22" 100lb Load Rating Review



10 Pack Promark Full Extension Drawer Slide 22" 100lb Load Rating Feature

  • 10 pairs of slides per case
  • 22" Full Extension
Features: ? Full Extension non-handed ? Positive Stop for fully extended drawers ? Hold-in design to prevent bounce back ? 32mm hole pattern with breating tabs ? Open access design for easy cabinet mounting ? Cushioned feature for pick-up noise reduction ? Steel ball bearing movement ? 100 lb. BIFMA tested load rating ? Face frame mounting hole ? Lever disconnect Application: Medium duty box drawer applications. This product has various applications in kitchens, office, store fixture, institutional and residential casework. Mounting: Side Mount Movement: Full extension with telescopic movement Side Clearance: 1/2" (12.7mm) + 1/16" Height: 1.80" (45.7mm) Load Rated: 100lbs (45kg) BIFMA load rated


Thursday, December 29, 2011

Blum Tandembox Interior Roll Out Slides B Height Narrow Wall Boxside 550mm (21 5/8") 100# Class Full Extention Kit Stainless Steel

Blum Tandembox Interior Roll Out Slides B Height Narrow Wall Boxside 550mm (21 5/8") 100# Class Full Extention Kit Stainless Steel Review



Blum Tandembox Interior Roll Out Slides B Height Narrow Wall Boxside 550mm (21 5/8") 100# Class Full Extention Kit Stainless Steel Feature

  • Kit Includes: (1) set drawer slides, (1) pair rear brackets, (1) pair front fixing brackets
  • (1) set gallery rod, (1) set narrow wall boxside, (12) 7 x 5/8 flat head Stainless Steel screws
  • Minimum opening height: 160mm (6 5/16"). 75#. Dynamic, 100#. Static. Full Extension
  • To see all sizes, Search: Blum Tandembox Interior Roll Out Slides
  • Looking for accessories? Search: Blum Tandembox Drawer Slides Accessories
Front Rail Sold Separately, Search: Blum Tandembox Drawer Slides Accessories Front Rail. Fabricate your own drawer bottom and back. B Height TANDEMBOX: Drawer bottom width = inside cabinet width minus 75mm (2 15/16"), Drawer bottom length = runner length minus 24mm (15/16"), Drawer back width = inside cabinet width minus 87mm (3 7/16"), Drawer back height = 135mm (5 5/16"), Note: Use 16mm (5/8") material for bottom and back.


Tuesday, December 27, 2011

Drawer Slide, Partial Extension, 12 in., Medium Duty, 100 lb. Capacity, White

Drawer Slide, Partial Extension, 12 in., Medium Duty, 100 lb. Capacity, White Review



Drawer Slide, Partial Extension, 12 in., Medium Duty, 100 lb. Capacity, White Feature

  • 100 lb. Load Capacity
  • Partial extension Slides
Hettich's epoxy drawer slide offers a self closing feature with roll-out prevention ensuring that drawers close automatically and precisely. The high grade powder coating combined with special rollers guarantees easy, quiet and uniform movement. The captive guide rail over the full drawer extension ensures excellent on-track precision. Available in white. Priced per pair. Length: 12" (300mm) Extension Loss: 2.71" (69mm) Weight Capacity: 100 lbs. KCMA (45kg.) Installation Width: 1/2" (12.5mm)


Sunday, December 25, 2011

Zinc Drawer Slide, 12"

Zinc Drawer Slide, 12" Review



Zinc Drawer Slide, 12" Feature

  • 1300PZC12 ZNC DRWR SLIDE 12IN
  • 12IN ZINC DRAWER SLIDE
Mounts with pan head screws. Positive stop lever prevents accidental drawer removal. Recommended for use with kitchen cabinets, bathroom vanities, desks, architectural woodwork, and store fixtures. Zinc-plated cold rolled steel. Ball bearing nylon rollers. 3" height; clearance required: 1/2" plus 1/32" minus 0 each side. Includes #6 x 13/32" Phillips Panhead screws and installation instructions in each polybagged set.


Friday, December 23, 2011

KV 8400 Series Full Extension Precision Ball Bearing Slides 22" 100# Class (Set)

KV 8400 Series Full Extension Precision Ball Bearing Slides 22" 100# Class (Set) Review



KV 8400 Series Full Extension Precision Ball Bearing Slides 22" 100# Class (Set) Feature

  • 100# Load Rating, Side mounted, Slide height - 1-13/16", Side clearance - 1/2" + 1/32" - 0
  • Steel ball bearing (3 bearings per inch of race). Exceptionally smooth and quiet. High quality slide
  • Full 32mm hole pattern, Non-handed, Easy disconnect
  • Optional Rear Mounting Bracket, Search: KV Rear Mounting Bracket Anochrome
  • Optional Face Frame bracket, Search: KV Face Frame Mounting Bracket
Designed for use on box drawer applications up to 24" wide and where the maximum weight load is not to exceed 100 pounds. Product features a lever disconnect for easy drawer removal.


Tuesday, December 20, 2011

Slide-Co #22315 7/8" BRN Drawer Guide

Slide-Co #22315 7/8" BRN Drawer Guide Review



Slide-Co #22315 7/8" BRN Drawer Guide Feature

  • Slide-Co #22315 7/8" BRN Drawer Guide
  • SLIDE-CO
Brown Polyethelene, Drawer Track Guide, Used For Aligning Drawer, Fits A 1/4' x 7/8' Track.


Monday, December 19, 2011

KV 8400 Series Full Extension Precision Ball Bearing Slides With 1" Overtravel 28" 100# Class (Set)

KV 8400 Series Full Extension Precision Ball Bearing Slides With 1" Overtravel 28" 100# Class (Set) Review



KV 8400 Series Full Extension Precision Ball Bearing Slides With 1" Overtravel 28" 100# Class (Set) Feature

  • 100# Load Rating, Side mounted, Slide height - 1-13/16", Side clearance - 1/2" + 1/32" - 16
  • Steel ball bearing (3 bearings per inch of race). Exceptionally smooth and quiet. High quality slide
  • Full 32mm hole pattern, Non-handed, Easy disconnect
  • Optional Rear Mounting Bracket, Search: KV Rear Mounting Bracket Anochrome
  • Optional Face Frame bracket, Search: KV Face Frame Mounting Bracket
Our Best Selling Full Extension Slide. 10" to 24" Full Extension With 1" Overtravel, 100# Class See all Sizes Search, KV 8400 Series


Sunday, December 18, 2011

26" Knape & Vogt 8430 Full Extension Push Open Drawer Slide - Ebony Black

26" Knape & Vogt 8430 Full Extension Push Open Drawer Slide - Ebony Black Review



The Knape & Vogt 8430 is a complete miracle of science for possesses the most promising feature which leading scientists believe will bring world peace and everlasting harmony to the world: Push To Open! Push To Open leads to a calming effect as one touches their cabinet door and it miraculously opens and leads ones jaw to simply drop open with amazement. The feeling, the one of utter joy will stay with you for days to come as you go about your business with an unmistable ear to ear smile that will bring warmth and joy to others. Now for the technical stuff. The KV 8430 is a Push To Open (think of a click pen) full extension drawer slide with telescopic ball bearing movement. The balls on this baby are close together, we're talking 3 balls per inch of bearing race, so the movement on this slide is exceptionlly smooth. In addition to all this the KV 8430 also comes standard with the 32mm hole patten which is great for cabinet makers and woodworkers.


Saturday, December 17, 2011

34'' Bottom Mount Brackets for Accuride 9301 Drawer Slides

34'' Bottom Mount Brackets for Accuride 9301 Drawer Slides Review



Heavy-duty brackets designed for use with Accuride 9301 slides.


Perfect for use on pantry pullouts, storage trays, and TV or entertainment unit platforms! Choose brackets based on slide length. Slide height varies between 3" to 3-25/64", depending on mounting application. Includes all hardware to mount brackets to slides and one pair of brackets. Slides sold separately.


Friday, December 16, 2011

Blum Drawer Slide Jig Gun

Blum Drawer Slide Jig Gun Review



Blum Drawer Slide Jig Gun Feature

  • Used for positioning cabinet members on cabinet sides
  • Holds cabinet member in place while screws are installed or pilot holes are made
  • Keeps cabinet members level
  • Ideal for face frame cabinets when positioning rear mount sockets
You're ensured perfect frameless or face frame installations of Blum epoxy coated drawer slides by simply positioning the jig. Quick, accurate, easy, and absolutely level every time.

Can be used with the following Blum runners:
METABOX 320 N, M, K, H
METABOX 330 M, K H

Using the handle scale with METABOX drawers:
* Mark on the cabinet front where the bottom of the drawer is to be mounted (includes 5mm safety clearance).
* Choose the notch on the handle that matches the drawer type.
* Place cabinet profile in the MINIFIX, hold against the mark and use a piloting bit to bore the mounting holes.
* Attach the cabinet profiles with wood screws.


Wednesday, December 14, 2011

Kreg NZ03 Magnetic Drawer Slide Mounting Tool

Kreg NZ03 Magnetic Drawer Slide Mounting Tool Review



Kreg NZ03 Magnetic Drawer Slide Mounting Tool Feature

  • Simplifies slide positioning for cabinet drawers
  • Tool uses reference points to position slides parallel to drawer openings
  • Works with most kinds of metallic slides
  • Produces a perfect alignment at each use
  • simplifies the process of positioning your slides accurately
The Kreg Magnetic Drawer Slide Mounting Tool simplifies the work of positioning your metallic slides to ensure smooth gliding drawer movement in cabinets. It uses the intersection of the cabinet stile and rail in face frame cabinets, and the cabinet side in frameless cabinets, as a reference point for positioning a slide perfectly parallel to the drawer opening. Simply place a metallic drawer slide into position on the base of the tool, which uses magnets to hold the slide in place, align the tool where the stile and rail meet, and drive the screws for a perfect alignment every time.


Tuesday, December 13, 2011

Accuride series 3832 Full Extension Drawer Slides, Zinc, 10'' length

Accuride series 3832 Full Extension Drawer Slides, Zinc, 10'' length Review



Accuride series 3832 Full Extension Drawer Slides, Zinc, 10'' length Feature

  • Hold-in detent to prevent drawer roll-out and bounce-back
  • Lever disconnect
  • Easy access to mounting holes
  • 100 lb./pair load rating
  • Steel ball bearings
This side mounted, 100 lb rated slide is the industry standard for kitchen and bath cabinets as well as furniture. Features new Cam Drawer Adjust for easy installation.


There are many uses throughout the house for this versatile side mounted slide. Use it in home offices, family rooms, bathrooms and kitchens. All slides in this series include quality features like soft touch ball bearings, a hold-in catch, a positive extension stop and a disconnect release lever. Series 3832 slides feature the 32mm hole pattern.

* Features/Specifications:
* Hold-in detent to prevent drawer roll-out and bounce-back
* Lever disconnect
* Easy access to mounting holes
* Silenced
* Clear zinc finish
* 100 lb./pair load rating
* Full extension
* Steel ball bearings
* Price is per pair of slides.


Monday, December 12, 2011

16" ACCURIDE 3732 Full Extension Drawer Slides

16" ACCURIDE 3732 Full Extension Drawer Slides Review



16" ACCURIDE 3732 Full Extension Drawer Slides Feature

  • 100 LB. Capacity
  • Ball bearings provide smooth, quiet movement of drawer
  • Zinc finish
  • High quality
  • Full extension slides
Full Extension Drawer Slides with a lower profile, only 1/2" wide and 1-1/2" tall, rated at 100 lbs per pair for light to medium applications. Features a front face-mounting hole for face frame applications, easy and simple unhanded disconnect to remove drawer from the cabinet and moves on silent-rolling acetal polymer ball bearings. These slides are a great choice when upgrading from 3/4 extension slides. Face frame hardware kit needed when your cabinets do not have rails for side mounting. They attach to your 3832-series drawer slides, and allow you to screw the slides to the front and back of your cabinet.Clear Zinc Finish. Sold in Pairs.


Saturday, December 10, 2011

Blum Tandem Premium Undermount Slides With Integrated Soft Close Full Extension For 21" Drawers 110# Class

Blum Tandem Premium Undermount Slides With Integrated Soft Close Full Extension For 21" Drawers 110# Class Review



Blum Tandem Premium Undermount Slides With Integrated Soft Close Full Extension For 21" Drawers 110# Class Feature

  • Full extension for 3/4" drawer side. 21" Drawer requires 21-3/4" Minimum Interior Depth
  • For inset applications increase Minimum Interior Depth by drawer front thickness
  • Undermount to drawer - Side-mount to cabinet, Rear-mount with bracket, Search: Blum Rear Mount
  • Locking devices are required, Search: Blum Locking Device For Tandem Drawer Slides
  • Also helpful, Search: Blum Tandem Accessory Kit
Show off your craftsmanship with the highest quality drawer slide on the market. Lifetime Warranty! Screws and Instructions included.


Wednesday, December 7, 2011

Kreg NZ03-B Drawer Mounting Brackets

Kreg NZ03-B Drawer Mounting Brackets Review



Kreg NZ03-B Drawer Mounting Brackets Feature

  • Helps align cabinet drawer boxes to slides
  • Can be used with framed and frameless cabinets
  • Fast and simple operation process
  • Pull the slide to the front of the drawer box and secure it into position by driving a screw
Kreg Drawer Mounting Brackets help align drawer box to cabinet slides for both framed and frameless cabinets. Just clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, pull the slide to the front of the drawer box, and secure it into position by driving a screw. For both face frame and faceless cabinets, aligning the drawer box to full extension slides is simple with our drawer mounting brackets. Simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, then pull the slide to the front of the box and drive your screws. The 12'' brackets work with most common drawer sizes, and the 1 8'' tabs on the front of the bracket are designed to fit under mounted full extension slides for perfect placement every time. Made of rugged, shock resistant plastic for years of service, these brackets are a great addition to your workshop and toolbox.


Tuesday, December 6, 2011

Blum Tandembox Interior Roll Out Slides B Height Narrow Wall 450mm (17 11/16") 100# Class Full Extention Kit Stainless Steel

Blum Tandembox Interior Roll Out Slides B Height Narrow Wall 450mm (17 11/16") 100# Class Full Extention Kit Stainless Steel Review



Blum Tandembox Interior Roll Out Slides B Height Narrow Wall 450mm (17 11/16") 100# Class Full Extention Kit Stainless Steel Feature

  • Kit Includes: (1) set drawer slides, (1) pair rear brackets, (1) pair front fixing brackets
  • (1) set gallery rod, (12) 7 x 5/8 flat head Stainless Steel screws
  • Minimum opening height: 160mm (6 5/16"). 75#. Dynamic, 100#. Static. Full Extension
  • To see all sizes, Search: Blum Tandembox Interior Roll Out Slides
  • Looking for accessories? Search: Blum Tandembox Drawer Slides Accessories
Front Rail Sold Separately, Search: Blum Tandembox Drawer Slides Accessories Front Rail. Fabricate your own drawer bottom and back. B Height TANDEMBOX: Drawer bottom width = inside cabinet width minus 75mm (2 15/16"), Drawer bottom length = runner length minus 24mm (15/16"), Drawer back width = inside cabinet width minus 87mm (3 7/16"), Drawer back height = 135mm (5 5/16"), Note: Use 16mm (5/8") material for bottom and back.